Heat Transfer Tape for Printable Transfer Vinyl

In the world of vinyl graphics, vinyl and tape go together like peanut butter and jelly. Application tape (or Transfer Tape) is essential for transferring cut vinyl to substrates.  In the garment decoration field, transfer tape is less essential. For most cut graphics using “T-shirt vinyl” like Logical Color WarmPEEL CP, no tape is needed. But for digitally printed apparel graphics, transfer tape can be a lifesaver.  This is especially true of thinner solvent printable media like Logical Color CozySOFT, and Siser ColorPrint Soft Opaque. These products require tape with unique properties to transfer them from the release liner to the garment without wrinkling or stretching the face film. So what tape should you use?

Some printed T-shirt films like BestPRINT and FlockPrint can be applied without transfer tape. But even with BestPRINT, there’s a case to be made for using tape. When placed on a heat press, the heat radiating from the platen can cause the edges of the film to curl. This can make it hard to place it smoothly and accurately on the shirt. Sliding a Teflon sheet over the film can help keep it flat but masking it with transfer tape will keep it from curling and help you place the transfer exactly where you want it.

For transfering solvent printable graphics, standard tapes used for vinyl graphics won’t work. Part of the reason for this is the necessity of leaving the tape on the print and garment through the heat transfer process. Paper tapes leave adhesive residue on the garment after removal. In addition to the residue problem, even high tack paper tapes don’t consistently remove the film from the liner, so it’s not a good option. Clear tapes for vinyl signs such as R-Tape AT60 or ABI 1310G are very likely to melt on the heat press. Cross them off your shopping list. What you need is a transfer tape that won’t melt and won’t leave adhesive residue on your newly decorated garment. We stock both EnduraTex ATT and Siser TTD heat transfer application tapes, so you have some choices.

Heat transfer tape looks different than vinyl appicaltion tape. It is a little thicker and can hold up to the heat of a press.

Siser TTD Easy Mask & High Tack Mask

If you’re using Siser ColorPrint PU, ColorPRINT Easy, ColorPRINT Soft Opaque, or ColorPRINT Extra, you’ll probably want a matching branded transfer tape. Siser has replaced their ColorPRINT Mask and ColorPRINT Mask Evolution tapes with TTD Easy Mask and TTD High Tack Mask. TTD Easy Mask is a clear, medium tack tape laminated to a paper liner that must be removed before use.  Siser recommends that the masking process be performed upside down, with the tape face down. The print is turned over and applied print-side-down on the tacky side of the tape. Easy Mask is the product of choice for ColorPRINT Easy. Easy Mask also works well with some other brands of heat transfer film including Logical Color WarmPEEL CP Print and Universal Print.  TTD Easy Mask comes in 20″ and 29.5″ widths. 20″ by Fifteen foot rolls start at only $18.00. For step by step instructions for using Easy Mask, please click here to download the instruction guide.

ColorPRINT Soft Opaque is too thin for TTD Easy Mask to handle, so Siser added TTD High Tack Mask. The more aggressive adhesive on TTD High Tack mask removes these films from their release liners more effectively. The instructions are the same, but the results are much better. ColorPRINT PU can be used with either Easy Mask or High Tack Mask. TTD High Tack Mask also comes in 20″ and 29.5″ widths with prices starting at only $18.00 for a 20″ x 15 foot roll.

It can be scary to pick out a masking tape. But no worries, SIGNWarehouse is here to help you pick the right one! You will have beautiful garments in no time!

EnduraTex ATT Series

If you’re using Logical Color, EnduraTex or other printable heat transfer films, try one of our ATT series heat transfer tapes. We now have three options: ATT450, 500L and 600. These are specially engineered for use with products like HotMark PRINT, HotMark Revolution Print, and HotMark PRINT SIR.  These are clear transfer tapes that come in a variety of tack levels, with and without a release liner.
ATT450 is our easiest and most affordable option. It’s a 3 mil, medium-tack tape on a release liner.  It works great with both thicker and thin films like WarmPEEL CP PRINT and HotMark PRINT, and it costs only $49.95 for a 20″ x 22 yard roll.
ATT500L is a low tack tape that comes without a liner. The tack level is so low you can stack your masked graphics without having to worry about them sticking to one another. And the lack of a liner is ideal for high-production shops where efficiency is key.
ATT600 is a high tack tape designed for use with very thin, premium PU films like Logical Color CozySoft PRINT, and HotMark Print. If you’ve tried one of other tapes in this article and you’re still having trouble getting the printed film off its release liner, ATT600 is your sure-fire solution. When you have your graphic masked, you may need to pull it aggressively to remove the liner. If you give it a good firm yank, it will produce a loud tearing or snapping sound, but you’ll have a masked graphic ready to press. For best results, remove the tape warm, then repress the graphic for a few seconds to seal the deal.

If you’re not sure yet which brand or product to use, just click here to download our handy chart. No matter which brand you choose, remember to use good squeegee techniques when laminating the tape to your print. This will avoid wrinkles that can be transferred to the film. You’ll find that, once you get the hang of it, using heat transfer tape to apply your printed T-shirt graphics is a fairly easy process. It helps you place your print correctly, facilitates removal of the film’s release liner, stands up to the high temperatures, and removes cleanly with no messy adhesive residue. If you still have heat transfer tape questions, feel free to drop them in the comments field below.